Technical Data; Sonochek Ultrasonic Measuring Device - Fluke SONOCHEK Operating Instructions Manual

Technical data

8 Technical data

8.1 SONOCHEK ultrasonic measuring device

GENERAL DATA
Measuring range
Design
Processor
Display
Touchscreen
Acoustic output of the
signals
Memory
Connections and
interfaces
Operating system
SONOCHEK 09.2018
The digital ultrasonic measuring device SONOCHEK and the
associated sensor system serve to carry out different tasks in
preventative plant maintenance:
 Detection and filtering of leaks on
compressed air, gas and vacuum systems
 State analysis of machines and systems
 Functional check of condensate drains
or valves
 Detection of leaks
 Detection of partial discharges
The device stores different readings. At the same time, spectra
are recorded as a function of time (spectrograms). In addition,
photos, voice memos or comments can be saved for each
process. An individual measurement report can be compiled with
just a few clicks. Each application is optimally supported by
software tailored to the measurement task in combination with
the adjusted sensor system.
-2
> 10 mbar × l/s
Digital ultrasonic measuring device with a touchscreen
ARM Cortex-A9 dual core 1.2 GHz
"
5 TFT display, resolution WVGA 800 x 480 pixels
PCT, 5-point multi-touch controller
Via speaker or wired headphones
8 GB flash system memory;
16 GB flash internal measurement data memory;
2 GB SDRAM
Ultrasonic sensors: Lemo;
Charger: USB 2.0 Micro-B;
Jack for stereo headphones: 3.5 mm;
Memory for data export: Slot for micro SD card (up to 32 GB)
Android 4.4.2
SONOCHEK
105