Table of Contents
Advertisement
Quick Links
Introduction
The Fluke 317 and 319 are hand-held, battery-operated clamp
meters (the Product) that measure:
ac and dc current
ac and dc voltage
resistance
The Product ships with:
test leads
soft case
three AAA batteries (installed)
PN 5325474 (English)
3/2022
©2022 Fluke Corporation. All rights reserved. Specifications are subject
to change without notice. All Product names are trademarks of their
respective companies.
Clamp Meter
Instructions
continuity
frequency
317/319
Advertisement
Table of Contents
Related Manuals for Fluke 317
Summary of Contents for Fluke 317
- Page 1 317/319 Clamp Meter Instructions Introduction The Fluke 317 and 319 are hand-held, battery-operated clamp meters (the Product) that measure: ac and dc current continuity ac and dc voltage frequency resistance The Product ships with: test leads ...
-
Page 2: Contact Fluke
Contact Fluke Fluke Corporation operates worldwide. For local contact information, go to our website: www.fluke.com. To register your product, or to view, print, or download the latest manual or manual supplement, go to our website. Fluke Corporation Fluke Europe B.V. - Page 3 Limit operation to the specified measurement category, voltage, or amperage ratings. Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc. Do not exceed the Measurement Category (CAT) rating of the lowest rated individual component of a Product, probe, or accessory.
- Page 4 Measure a known voltage first to make sure that the Product operates correctly. Connect the common test lead before the live test lead and remove the live test lead before the common test lead. Remove all probes, test leads, and accessories that are ...
- Page 5 Do not use in CAT III or CAT IV environments without the protective cap installed on test probe. The protective cap decreases the exposed probe metal to <4 mm. This decreases the possibility of arc flash from short circuits. For safe operation and maintenance of the product: Remove batteries to prevent battery leakage and damage ...
-
Page 6: Software Specifications
Symbol Description Earth ground Alternating current Direct current Conforms to European Union directives. Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low- voltage MAINS installation. -
Page 7: General Specifications
General Specifications Digital Display 6000 count resolution Clamp Opening Size 37 mm (1.45 in) Jaw Diameter 37 mm (1.45 in) Dimensions 162.4 mm x 58.25 mm x 30.5 mm (6.39 in x 2.29 in x 1.20 in) Weight ∼384 g (with batteries) Battery 3 AAA IEC LR03 batteries Temperature... - Page 8 Electromagnetic Compatibility (EMC) International IEC 61326-1: Portable Electromagnetic Environment; IEC 61326-2-2, CISPR 11: Group 1, Class A Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself. Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings...
-
Page 9: Electrical Specifications
Electrical Specifications The accuracy specification is defined as ±(% reading + digits) at 23 °C ± 5 °C. Function Parameter Range 40.00 A 40.00 A 600.0 A 600.0 A 1000 A Resolution 0.01 A 0.01 A 0.1 A 0.1 A Accuracy 1.6 % ±6 digit 1.6 % ±6 digit... - Page 10 Function Parameter Range 40.00 A 40.00 A 600.0 A 600.0 A 1000 A Resolution 0.01 A 0.01 A 0.1 A 0.1 A (A dc) Accuracy 1.6 % ±6 digit 1.6 % ±6 digit [40 A] [40 A] 1.5 % ±5 digit 1.5 % ±5 digit [600 A] [600/1000 A]...
- Page 11 Function Parameter ≤30 Ω Integration 100 ms Inrush Time Range 5.0 Hz-500.0 Hz Accuracy 0.5 % ±5 digit Trigger Level 10 Hz-100 Hz ≥5 A, 5 Hz-10 Hz, 100 Hz-500 Hz ≥10 A The accuracy specifications apply at 23 °C ±5 °C (73 °F ±41 °F). Below 18 °C and above 28 °C (64 °F and above 82 °F) accuracy degrades at (0.1) times specification per °C.
- Page 12 LIMITED WARRANTY This Fluke product will be free from defects in material and workmanship for 1 years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.
- Page 13 The Product Clamp Meter...
- Page 14 Jaw Wear...
- Page 17 Display Hold MIN MAX AVG 2 sec = Exit...
- Page 18 600 V 1000 A 1000 A 600 A 40 A HOLD ZERO INRUSH TRUE RMS CLAMP METER 600 V 100 ms...