General Information; Tools And Materials; Component Locations - Dometic M65-700 Instruction And Operation Manual

General Information

3 General Information
This section provides general information about the
toilet and its components and dimensions.
I The images used in this document are for reference
purposes only. Components and component
locations may vary according to specific product
models. Measurements may vary ±0.38 in. (10 mm).

3 .1 Tools and Materials

Dometic recommends that the following tools and
materials be used while installing the appliance.
Included Parts
Gravity-discharge Toilet
Tank Mounting Screws with Washers (4)
Installer-Supplied Parts
Thru-hull Vent Fitting
Dockside Discharge Fitting
5/8 in. (16 mm) I.D. Marine Sanitation Quality Hose
1.5 in. (38 mm) I.D. Marine Sanitation Quality Hose
Stainless Steel Band Clamps (8)
Water Supply
Recommended Tools
Drill Pan-head Screwdriver
Drill Bit Screwdriver for Band Clamps
Marker Phillips-head Screwdriver
4

3 .2 Component Locations

This section identifies the toilet components. The
components may vary slightly depending on the model.
q
w
o
a
s
d
k
l
;
;
2)
2!
1 M65-700 Components
Gravity-discharge Toilet
e
r
t
y
u
i
f
g
h
j
EN