Installation; Preparing The Appliance - Vision e-line SOLUS VS75 User Manual

INSTALLATION

Before installa on, check that all parts are included and undamaged. If the appliance is damaged, check
with the supplier before installa on and opera on. If the mains power supply lead is damaged in any way, it
must be replaced by a suitable equivalent approved by the manufacturer.
The main box contains the appliance, 2 x suc on cups and 1 x magnet tool. Packed with the appliance
(behind the glass panel) are addi onal boxes each with a contents list printed on the outside of each box.
GLASS REMOVAL – ACCESSING PARTS
To gain access to various contents required for installa on follow steps shown in Fig.1 through to Fig.4 to remove the
glass panel on the front of the appliance.
FIG. 1
FIG. 3
REMOVAL
OF WALL MOUNTING BRACKET
The wall moun ng bracket is secured to the rear panel of the appliance. Remove the screws and the wall
moun ng bracket and put aside for later use – see Fig. 5.
POWER CABLE
A er inser ng the power cable into the socket on the bo om right side of the appliance, secure in place
using the power cable securing bracket and ST4*8 screw (found inside Box #1) – see Fig.6.

PREPARING THE APPLIANCE

Sucker x2
8
FIG. 2
FIG. 2
Magnet Tool x1
FIG. 4