Overview; Parts Identification And Terminology - SGM P Series User Manual

Overview

The P-2/ P-2 POI is an IP65/ IP66-rated RGBW LED wash light with a small footprint and high output, designed for multiple applica-
tions, including when wireless operation is essential (POI only).
P-2 Series features:
• A wash light, flood light, and a strobe light, weighing only 6.1 kg/ 13.4 lbs.
• Multi-environmental fixture due to its IP65/ IP66 rating that can operate in many environments and in temperatures from
-40° C to 50° C.
• 18 high-power RGBW LEDs divided into three vertical, individually controllable LED segments, for wide ranging color and
effect combinations.
• Fully RGBW color mixing and adjustable color temperature correction (CTC) from 2,000K to 10,000K.
• Native symmetrical lenses of either 15°, 21°, or 43°.
• Different beam angles available by using the diffusion filters.
• Programmable standalone scenes.
• Fully RDM implemented, compliant with the USITT DMX512 standard.
• Very low power consumption (170 W), and an expected lifetime of the multiple LEDs of 50,000 hours*.
• Optional accessories, such as barndoors, diffusion filters, color frames, etc.
• Built-in wireless DMX (POI only).
• Corrosion classified C5-M (marine) for coastal and offshore areas with high salinity (POI only).
* At 70% of luminous output under the manufacturer's test conditions.

Parts identification and terminology

A: 18 x 10W LEDs
B: P-2 Tilt lock
C: Cooling fan
D: Control panel (POI n/a)
E: OLED Display (POI n/a)
F: DMX in and out
G: Safety wire attachment point
H: Dehumidifiers and GORE-TEX membranes
I: Holes for Omega bracket / M-10 screws (x2)
J: Power cable
K: P-2 POI Tilt lock (POI only)
L: LED indicator (POI only)
6
A
D
Figure 1: Parts identification and terminology
B
F
E
K
Illustrations might vary from recieved products.
C
H
J
G
I
L
This is subject to change without notice.