ATOMSTACK X7 Pro Series Installation Manual page 36

3.Laser module cleaning
After a period of utilization for the laser module, there will be some remains stay at the protective cover, heat sink, and the laser head. The
remains need to be cleaned in time so that not affect the use of the laser module.
The windshield and protective cover must be removed before cleaning.
1.Please clean the protective cover and heat sink with the alcohol and non-woven fabric shown as chart 1.
2. Please clean the laser head with the alcohol and non-woven fabric shown as chart 2.
windshield
screws of
protective cover
laser module
protective cover
non-woven
fabric
non-woven
fabric
1
2