ATOMSTACK X7 Pro Series Installation Manual page 10

Part 6：Instructions for use of the display
LaserGRBL exports nc
format, Lightburn exports
gc format
Select the file to be
engraved and move
the laser to the position
to be engraved
Click the
button to start carving
Press the power
button to enter the
Insert SD card
home page of the
display
Laser fixed focus
method: use a fixed
focus lens below the
laser to determine the
focal length
Select the number of
times you want to
engrave/cut, start
engraving/cutting
Click Cavre to
enter the SD card
file list
Click the position
button to determine
the origin of the laser
During the engraving
process, the engraving
speed and energy can
be adjusted. If there is
an abnormal situation,
you can press the pause
or stop function key
Click the frame button
to confirm the
engraving range
Finish carving