aventon Aventure User Manual page 19

Use caution to avoid damage to battery connector terminals, which are exposed when the battery
is unlocked and removed from the frame of the bike. In the case of damage to the terminals or
battery mounts, please discontinue use and contact Aventon Support immediately.
WHEN INSTALLING THE BATTERY ON THE BIKE
Ensure the battery battery is turned o .
DO NOT force the battery into the tray; slowly align and gently push the battery down into the tray. Then
push the battery in (make sure you push hard enough) and hear the "CLICK" sound. Slightly turn the key to
feel if there's resistance from the key. If you can feel the resistance, then the battery is completely locked.
Make sure there is no spaced between battery and tray, confirm battery.
Ensure the battery has been properly secured to the bike before each use by carefully pulling outwards
on the battery with both hands once locked.
CHARGER SAFETY INFORMATION
The charger should only be used indoors in a cool, dry, ventilated area, on a flat, stable, hard surface.
Avoid charger contact with liquids, dirt, debris, or metal objects. DO NOT cover the charger while in use.
Store and use the charger in a safe place away from children.
Fully charging the battery before each use can help extend the life of the battery and reduces the chance
of over-discharging.
DO NOT charge the battery with any chargers other than the one originally supplied by Aventon Bikes or
a charger designed for use with your specific bike purchased directly from Aventon Bikes.
The charger works on 110/240V 50/60 Hz standard home AC power outlets and automatically detects
and accounts for incoming voltage. DO NOT open the charger or modify voltage input.
DO NOT yank or pull on the cables of the charger. When unplugging carefully remove both the AC and DC
cables by pulling on the plastic plugs directly, and not on the cables.
The charger is expected to get relatively warmer as it charged. If the charger gets too hot to touch, you
notice a strange smell, or any other indicator of overheating, discontinue using the charger and contact
Aventon Support.
Charge the battery only with the charger originally supplied with the bike from Aventon BIkes,
or a charger purchased directly from Aventon Bikes, designed for use with your specific bike
serial number, as approved by Aventon Bikes. Never use an aftermarket charger, which can
result in damage, serious injury, or death.
Please take special care in charging your bike from Aventon Bikes in accordance with the
procedures and safety information detailed in this manual. Failure to follow proper charging
procedures can result in damage to your bike, the charger, or personal property, and/or cause
serious injury or death.
18