Nortel DMS-10 Series Quick Reference Manual page 24

14 Maintenance Commands
Command Name
Note: If all of the parameters in the AMAHRS ss ee ii command are set
to 00, the NO BLOCK LAST HOUR alarm is disabled.
AMATPSW
AMATPSW tttt iiiiii
BAUD
BAUD a rrrr
Note: link 1 - J11 for 56K polling, J13 for 1200-9600 baud polling.
link 2 - J12 for 56K polling, J14 for 1200-9600 baud polling.
BX25PARM t
BX25PARM t v
BX25PARM PRIHDR
BX25PARM PRIHDRx
Note: The BX25PARM PRIHDR command is only valid for Turbo
BMCs and Non-Turbo BMCs equipped with 3 1/2" disk drives.
COLLPSW
COLLPSW # ttttt iiiiii
*********************************************************
DMS-10 ONLY
DMSO p aa
DMSP
DMSP xxxx
297-6201-500 BMCA001 and up
Explanation
Examine the AMAT Password.
Change AMAT password.
tttt - 4 digit sensor type.
iiiiii - 6 digit sensor ID.
Displays current polling baud rate for
links 1 and 2.
Change polling baud rate for links 1
and 2.
a - link: 1 or 2.
rrrr - baud rate: 1200/2400/4800/
9600/56K.
Displays the value of the selected
BX.25 timer.
Changes the value of the selected
BX.25 timer.
t - BX.25 timer:
R20 - restart request transmission;
default: 03.
R22 - restart reset response;
default: 03.
T20 - restart request response;
default: 180.
T22 - reset request response;
default: 80.
T24 - window status transmission;
default: 150.
v - timer value: 1-255.
Displays the AMATPS setting.
Changes the AMATPS setting.
x - 1 for 1986 AMATPS or 2 for 1990
AMATPS.
Displays current collector password.
Modifies the collector password.
# - Collector Password #: 1 or 2
tttt - 4 hex character office type.
iiiiii - 6 character office id.
Reactivates remote DMS-10 terminals.
Displays DMS-10 password.
Changes DMS-10 password.
xxxx - four-character password.
Standard 02.01 July 1997