BRP ROTAX 125 SENIOR MAX EVO Repair Manual page 76

Special tools The following special tools and equipment are required:
Instructions See
NOTE
Use two hex. screws to separate the case halves
1. Unscrew all M6 screws (1) and remove them.
2. Unscrew one half of the crankcase from the trestle mounting plate.
3. Screw Allen screws (2) evenly into the extraction thread and press the case halves evenly
apart.
Figure 5.6: Crankcase
1,2
______________________________________________________
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
BRP-Rotax
REPAIR MANUAL
DISASSEMBLING THE CRANKCASE
Part no.
276016
n.a.
Figure: Crankcase.
Allen screws
Description
Puller assembly
Plastic hammer
Field of application
Case halves
Crankshaft
Chapter 5
Page 9
November 01 2021