General
NOTE
Take a measuring cup and fill with 100 ml of XPS® KART TEC GEAR OIL
Special tools
The following special tools/equipment are required:
Instructions
See
1. Remove air vent screw (1).
2. Add the specified volume of gear oil (100 ml) through the filling hole (2) in the housing.
3. Use sealing rings A6x10 for the Allen screws (3 = oil drain plug).
4. Screw in the vent screw (1) hand-tight.
Figure 7.26: Adding oil
______________________________________________________
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
BRP-Rotax
REPAIR MANUAL
FILLING GEARBOX WITH OIL
Part no.
25473
Figure: Adding oil
1
Air vent screw
Oil drain plug
3
Description
XPS® KART TEC GEAR
OIL
Filling hole
2
Field of application
Gearbox
Chapter 7
Page 25
November 01 2021