Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Novus RHT-WM
Summary of Contents for Novus RHT-WM
- Page 1 RHT-WM and RHT-DM Transmitter INSTRUCTIONS MANUAL – V2.0x A NOVUS AUTOMATION...
-
Page 2: Mechanical Installation
Model RHT-DM dimensions The RHT-WM (Wall Mount) model must be attached to the wall. By removing the transmitter cover, you can access the two fixing holes and the connector, as shown in Figure 3. To ensure the specified accuracy and protection degree, you must mount the transmitter with the sensor capsule facing down. -
Page 3: Electrical Installation
• For 24 hours, place it within an 80 °C (± 10 °C) oven. • For 48 hours, place it in a place with temperature between 20 and 30 °C (68 and 86 °F) and humidity over 75 % RH. • Place the sensor back in the capsule. NOVUS AUTOMATION... -
Page 4: Sensor Replacement
Do not touch the sensor. For this procedure, it is recommended to use clean antistatic gloves. Step 5: Place the protection tip again and turn it clockwise to secure it to the device. • NOVUS AUTOMATION... - Page 5 The TxConfig interface and software compose the Transmitter Configuration Kit, with can be purchased separately from the manufacturer or one of its distributors. The software can be updated for free on NOVUS website. To install it, run the Tx_setup.exe and follow the instructions.
- Page 6 If the "Humidity Reading Type" option does not appear even after the RHT transmitter is correctly detected, the TxConfig software version is probably old and does not support this feature. In this case, download and update the latest version. NOVUS AUTOMATION...
-
Page 7: Specifications
The transmitter sensor may be damaged or lose calibration if it is exposed to aggressive atmospheres with high concentrations as Chloride Acid, Nitride Acid, Sulphuric Acid and Ammonia. Acetone, Ethanol and Propylene Glycol may cause reversible measurement errors. Measures accuracy and sensor operating limits: Figure 11 - Humidity and temperature accuracies NOVUS AUTOMATION... -
Page 8: Warranty
This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. WARRANTY Warranty conditions are available on our web site www.novusautomation.com/warranty. NOVUS AUTOMATION...
Need help?
Do you have a question about the RHT-WM and is the answer not in the manual?
Questions and answers