Page 1
RHT-WM and RHT-DM Transmitter INSTRUCTIONS MANUAL - V1.2x G CE Mark This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. NOVUS AUTOMATION...
Page 2
Fig. 2 - Model RHT-DM dimensions The model RHT-WM (Wall Mount) was designed to be mounted directly onto a wall. With the cover off, the user can access the 2 fixing points and the signal connector, as shown in Fig. 3. The transmitter sensor capsule must be placed faced down in order to assure the specified accuracy and protection level.
• A specific electrical power supply network should be provided for instruments use only. • In controlling and monitoring applications, possible consequences of any system failure must be considered in advance. • RC filters (47 R and 100 nF, serial) in inductor charges (contactors, solenoids, etc.) are recommended. NOVUS AUTOMATION...
Page 4
Minimum Range indicated below in this same field. When the Lower Limit is set to a value higher than the Upper Limit, the output current has a decreasing behavior (20 ~ 4 mA or 10 ~ 0 V). NOVUS AUTOMATION...
Page 5
If the "Humidity Reading Type" option does not appear even after the RHT transmitter is correctly detected, the TxConfig software version is probably old and does not support this feature. In this case, download and update the latest version. NOVUS AUTOMATION...
Nitride Acid, Sulphuric Acid and Ammonia. Acetone, Ethanol and Propylene Glycol may cause reversible measurement errors. Measures accuracy and sensor operating limits: Fig. 10 - Humidity and temperature accuracies WARRANTY Warranty conditions are available on our web site www.novusautomation.com/warranty. NOVUS AUTOMATION...
Need help?
Do you have a question about the RHT-WM and is the answer not in the manual?
Questions and answers