Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Novus RHT-XS
Summary of Contents for Novus RHT-XS
- Page 1 RHT-XS Transmitter INSTRUCTIONS MANUAL - V2.0x NOVUS AUTOMATION...
- Page 2 MECHANICAL INSTALATION The RHT-XS electronic housing is designed for wall mounting, while its remote sensor module is intended for inserting and screwing in a flange. By removing the cover of the transmitter electronic module, the user has access to the two fixing holes, as shown in the figure below: Figure 1 –...
- Page 3 • Place it within an 80 °C (176 °F) (±10 °C) oven for 24 hours. • Place it for 48 hours in a place with a temperature between 20 °C (68 °F) and 30 °C (86 °F) and humidity over 75 % RH. • Place the sensor back in the capsule. NOVUS AUTOMATION...
- Page 4 Note: The factory default configuration is (unless otherwise specified or ordered): • Measuring ranges: 0 to 100 °C (32 to 212 °F) and 0 to 100 % RH. • 0 °C (32 °F) of correction zero. • Output at maximum value for sensor failures. NOVUS AUTOMATION...
- Page 5 • The software will recognize the RHT-XS model, read its configuration, and make it available to the user. • In the "Options" menu, enter "Humidity Reading Type" (only available when an RHT-XS model is detected) and select the "Dew Point" option. At this point, the values of the scales will be converted to the dew point unit, i.e., degrees (Celsius or Fahrenheit, as selected).
- Page 6 Sensors capsule: IP40 Cable entrance Compress fitting PG7. Operating limits Sensor (RHT-XS): See Figure 12. Electronic circuit (RHT-XS): Electronic circuit Operating temperature: -10 to 65 °C (14 to 149 °F), 0 to 95 % RH. Storage temperature: -20 to 80 °C (-4 to 176 °F).
- Page 7 WARRANTY Warranty conditions are available on our website www.novusautomation.com/warranty. NOVUS AUTOMATION...
Need help?
Do you have a question about the RHT-XS and is the answer not in the manual?
Questions and answers