Safety Policy - Seco SBC-D23 User Manual

Table of Contents

1.7 Safety Policy

In order to meet the safety requirements of EN62368-1:2014 standard for Audio/Video, information and communication technology equipment, the SBC-D23 Module

shall be:

used exclusively inside a fire enclosure made of non-combustible material or V-1 material (the fire enclosure is not necessary if the maximum power supplied

to the board never exceeds 100 W, even in worst-case fault);

used inside an enclosure provided with the symbol IEC 60417-5041 (element 1a according to clause 9.5.2 of the IEC 62368-1) on the external part;

used inside an enclosure compliant with all applicable IEC 62368-1 requirements

used along with CPU Heatspreader/heatsinks designed according to the thermal characteristics indicated in the par. 2.2 and to the mechanical characteristics

indicated in par. 2.4. The board in its enclosure must be evaluated for temperature and airflow considerations.

installed in a way that prevents the access to the board from children

The manufacturer which include a SBC-D23 module in his end-user product shall:

verify the compliance with all applicable clauses of the IEC 62368-1 in its own final operating condition;

check that all connections form or to the board are compliant to ES1 requirements;

provide an instructional safeguard against thermal injuries, according to clause 9.4.2 of the above mentioned standard. This instructional safeguard must be

placed both on end-user product's User Manual and on the products itself (Danger Label, it must be placed near the CPU or its heatsink).

The board shall be powered by a Power Supply Unit separately approved and classified ES1/PS2 according to the requirements of IEC EN 62368-1.

SBC-D23

Table of Contents