Table of Contents
Advertisement
2.3.4
Power consumption
The power consumption has been measured on V
Keysight and must be intended as average value (30 seconds acquisition). For peak measurement please refer to following Values, acquired with DC Power Analyzer
Keysight.
For measurement, the following configuration has been considered.
Processor: PX30 Commercial temperature range;
RAM: 2GB DDR3L;
Storage: 4GB eMMC;
Video Interface: LVDS + HDMI;
Networking: 1x FastEthernet LAN + Modem module QUECTEL EG25GGB-MINIPCIE + WiFi module Azurwave AW-CM390MA;
Audio: Power Amplifier mounted
Other: no microSD Slot, UART #B RS-232 mode
Commercial Temperature range
SBC-D23
SBC-D23 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by P.Z. - Copyright © 2021 SECO S.p.A.
power rail using a 24V
IN
Status
U-Boot Idle (Linux)
Boot (Linux)
Idle (Linux)
Test Storage Device (3 x USB)
CPU 100% + GPU 100% + LTE + Wi-FI
source. Power consumption measurement is performed with DC Power Analyzer
DC
Configuration #1
Average Value (30s)
Peak Value
4.8W
0.200A
3.7W
7.51W
5.04W
0.210A
5.28W
8.09W
10.97W
0.457A
18.7W
0.196A
0.313A
0.220A
0.337A
0.779A
19
Advertisement
Table of Contents
