Table of Contents
Advertisement
OPERATING THE VACUUM
VERSATILE FLOOR-TO-CEILING CLEANING
UPRIGHT
For cleaning carpets and hard floors. To activate
brushroll, step on floor nozzle and tilt handle back.
Use the wand
in Above-Floor
Mode for quick
jobs above
shoulder height.
ABOVE-FLOOR
With pod attached, detach the wand from the
floor nozzle.
LIFT-AWAY WITH WAND
Use the wand in Lift-Away mode for more reach
when cleaning above-floor areas like baseboards,
corners, and ceilings.
NOTE: See previous page for instructions on how to detach the pod, wand, and handle.
s h a r kc l e a n . c o m
POWERED LIFT-AWAY
Detach the pod to go into Powered Lift-Away
mode to reach under furniture to clean carpets and
hard floors.
Use the handle
in Above-Floor
Mode for quick
jobs off the floor.
ABOVE-FLOOR
With pod attached, detach the handle from the wand.
LIFT-AWAY WITH HANDLE
Use the handle in Lift-Away mode for more detailed
cleaning of above-floor areas like upholstery,
windowsills, or stairs.
MAINTENANCE
IMPORTANT: Remove the battery before performing any maintenance.
To remove, lift the handle on top of the battery and pull up.
EMPTYING THE DUST CUP
To remove Dust Cup, slide up the release tabs on
both sides. Tilt the dust cup away from pod, and lift
to remove.
Lint
Screen
To access the Lint Screen inside the dust cup, press
the top button and lift the handle to open the dust
cup. Brush the screen lightly to remove collected
debris.
Position the dust cup over the trash, then press the
bottom button to release dust and debris.
To reinstall the dust cup, place the bottom into the
pod and tilt the dust cup toward the wand until it
clicks into place.
s h a r kc l e a n . c o m
Advertisement
Table of Contents
