Disconnect the battery pack from the respiratory symptoms. If symptoms paint, paint thinners, mothproofing appliance before making any adjustments, Only use Shark® branded filters and persist, seek medical advice/attention. substances, or flammable dust) changing accessories, or storing appliance. accessories. Failure to do so will void e) Ingestion: DO NOT induce vomiting.
Page 3
AUTO-EMPTY ASSEMBLY (IW3000) NON-AUTO-EMPTY ASSEMBLY (IW1000) 1. Slide the Wand onto the neck of the Floor 4. Place the dock on the floor near a wall 1. Slide the Wand onto the neck of the Floor For proper operation, ensure all components Nozzle until it clicks into place.
Page 4
ODOR NEUTRALIZER TECHNOLOGY ODOR NEUTRALIZER TECHNOLOGY ADJUSTING THE ODOR INTENSITY ODOR CARTRIDGE REPLACEMENT 1. REMOVE ODOR DIAL 2. REMOVE OLD ODOR FROM THE AUTO-EMPTY DOCK CARTRIDGE ODOR DIAL Flip up the handle and rotate the dial clockwise Rotate the cartridge counterclockwise in Flip up the dial handle and rotate the odor dial until the two arrows are aligned.
NOTE: When the unit is docked properly, the charging lights on the battery will blink, indicating that charging has begun. NOTE: The Shark battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of NOTE: The main unit comes with a partial charge.
Page 6
BATTERY REMOVAL USING YOUR VACUUM REMOVING THE BATTERY CONTROLS AND CLEANING MODES POWER UPRIGHT BATTERY When upright, the nozzle will lock to allow Press the button on the UI Screen to for free standing storage when the hand vac turn on power. To turn off power, press To remove the battery from the hand vacuum, is detached.
ABOVE-FLOOR CLEANING MAINTAINING YOUR VACUUM EMPTYING THE DOCK DUST BIN ABOVE-FLOOR WITH WAND ABOVE-FLOOR WITH HAND VACUUM Detach the hand vacuum to clean above- To detach the floor nozzle from the wand, step on the nozzle while pressing the floor areas. Press the front latch release nozzle release button at the bottom of button on the hand vac where it meets the the wand.
USING YOUR VACUUM MAINTAINING YOUR VACUUM USING THE AUTO-EMPTY DOCK CLEANING THE DUST CUP AND FILTER Place the vacuum on the dock in a downward Once evacuation is complete, the vacuum With the dust cup open and the power off, To deep-clean the dust cup, slide the release motion.
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM CLEANING THE SENSORS CLEANING THE AUTO-EMPTY DOCK FILTER Make sure to clean the Detect sensors Fig. 1 regularly, as hair and other debris may build up and obstruct them. If the sensors are partially obstructed, Auto mode will not function as expected.
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM CHECKING FOR BLOCKAGES IN THE VACUUM TROUBLESHOOTING If you run over a hard or sharp object or notice a noise change while vacuuming, check for WARNING: To reduce the risk of shock and unintended operation, turn off blockages or objects caught in the brushroll.
• The image shown here is for illustrative purposes only and may be subject to change. ODOR NEUTRALIZER SPECIFICATIONS 1. Product Name: Odor Neutralizer Cartridge 2. Manufacturer: Shark Ninja 89 A Street, Needham, MA 02494 3. Weight: 17.4g / 0.61oz 4.
Page 12
• Accessory type and quantity may vary depending on the model. • The image shown here is for illustrative purposes only and may be subject to change. 814000198B PRINTED IN MEXICO SC: 02-02-2024 OBPN: N/A MODELS:IW1111_B *814000198B*...
Need help?
Do you have a question about the Cordless Detect Pro IW3000 Series and is the answer not in the manual?
Questions and answers