Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Shark Cordless Detect Pro IW1600 Series
Summary of Contents for Shark Cordless Detect Pro IW1600 Series
- Page 1 Cordless Detect Pro ™ Vacuum IW1600 Series IW3600 Series OWNER’S GUIDE...
-
Page 2: Important Safety Instructions
Pre-motor filter, and soft roller in place. paint, paint thinners, mothproofing may create a risk of injury and fire. e) Ingestion: DO NOT induce vomiting. Only use Shark® branded filters and substances, or flammable dust) Disconnect the battery pack from the Seek medical advice/attention. - Page 3 AUTO-EMPTY ASSEMBLY (IW3600) NON-AUTO-EMPTY ASSEMBLY (IW1600) 1. Slide the Wand onto the neck of the Floor 4. Place the dock on the floor near a wall 1. Slide the Wand onto the neck of the Floor For proper operation, ensure all components Nozzle until it clicks into place.
- Page 4 ODOR NEUTRALIZER TECHNOLOGY ODOR NEUTRALIZER TECHNOLOGY ADJUSTING THE ODOR INTENSITY ODOR CARTRIDGE REPLACEMENT 1. REMOVE ODOR DIAL 2. REMOVE OLD ODOR FROM THE AUTO-EMPTY DOCK CARTRIDGE ODOR DIAL Flip up the handle and rotate the dial clockwise Rotate the cartridge counterclockwise in Flip up the dial handle and rotate the odor dial until the two arrows are aligned.
-
Page 5: Li-Ion Battery
NOTE: When the unit is docked properly, the charging lights on the battery will blink, indicating that charging has begun. NOTE: The Shark battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of NOTE: The main unit comes with a partial charge. -
Page 6: Battery Removal
USING YOUR VACUUM BATTERY REMOVAL REMOVING THE BATTERY CONTROLS AND CLEANING MODES POWER UPRIGHT BATTERY When upright, the nozzle will lock to allow Press the button on the UI Screen to for free standing storage when the hand vac turn on power. To turn off power, press To remove the battery from the hand vacuum, is detached. -
Page 7: Above-Floor Cleaning
ABOVE-FLOOR CLEANING MAINTAINING YOUR VACUUM EMPTYING THE DOCK DUST BIN ABOVE-FLOOR WITH HAND VACUUM ABOVE-FLOOR WITH WAND Detach the hand vacuum to clean above- To detach the floor nozzle from the wand, floor areas. Press the front latch release step on the nozzle while pressing the button on the hand vac where it meets the nozzle release button at the bottom of wand, then lift off the hand vacuum. - Page 8 USING YOUR VACUUM MAINTAINING YOUR VACUUM USING THE AUTO-EMPTY DOCK CLEANING THE DUST CUP AND FILTER Place the vacuum on the dock in a downward Once evacuation is complete, the vacuum With the dust cup open and the power off, To deep-clean the dust cup, slide the release motion.
-
Page 9: Maintaining Your Vacuum
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM CLEANING THE SENSORS CLEANING THE AUTO-EMPTY DOCK FILTER Make sure to clean the Detect sensors Fig. 1 regularly, as hair and other debris may build up and obstruct them. If the sensors are partially obstructed, Auto mode will not function as expected. -
Page 10: Troubleshooting
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM CHECKING FOR BLOCKAGES IN THE VACUUM TROUBLESHOOTING If you run over a hard or sharp object or notice a noise change while vacuuming, check for WARNING: To reduce the risk of shock and unintended operation, turn off blockages or objects caught in the brushroll. -
Page 11: Five (5) Year Limited Warranty
ADDITIONAL ACCESSORIES AVAILABLE ON SHARKACCESSORIES.COM Crevice Tool FIVE (5) YEAR LIMITED WARRANTY Duster Crevice Tool Upholstery Tool The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Wide Upholstery Tool Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable. -
Page 12: Technical Specifications
1. Product Name: Odor Neutralizer Cartridge not transferable. Model Number: ����������������������������� 2. Manufacturer: Shark Ninja 89 A Street, SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period Date Code: ��������������������������������� of two (2) years from the date of purchase when it is used under normal household conditions and Needham, MA 02494 maintained according to the requirements outlined in the Owner’s Guide, subject to the following... - Page 13 This product may be covered by one or more U.S. patents. See sharkninja.com/patents for more information. © 2023 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. DETECT PRO, FLOORDETECT, and LIGHTDETECT are trademarks of SharkNinja Operating LLC.
Need help?
Do you have a question about the Cordless Detect Pro IW1600 Series and is the answer not in the manual?
Questions and answers
The dust dispenser with not **** the dirt anymore
The dust dispenser on the Shark Cordless Detect Pro IW1600 Series may not be collecting dirt anymore due to a full dust cup, which can be indicated by the dust bin full indicator light. To resolve this, empty the dust cup by turning off the power, holding the vacuum over a trash bin, and pressing the release button to open the dust cup lid and release debris. Additionally, check if the filters are clogged and clean them as needed, ensuring they are completely dry before reinstalling.
This answer is automatically generated
@Mr. Anderson
I did all that - and it will not **** the dirt into the dust box anymore ?
The Shark Cordless Detect Pro IW1600 Series may not be picking up dirt into the dust box due to several possible reasons:
1. Full Dust Bin – If the dust bin full indicator light is on, the bin needs to be emptied.
2. Clogged Filters – Filters might be clogged and should be cleaned and air-dried completely before reinserting.
3. Blocked Nozzle or Wand – There may be debris blocking the nozzle or wand, preventing suction.
4. Improper Assembly – Ensure all components, including the dust cup and accessories, are securely attached.
5. Battery Issues – If the vacuum is not powered properly, check if the battery is charged and correctly installed.
Cleaning the filters, emptying the dust bin, and checking for blockages can help restore proper suction.
This answer is automatically generated