Table of Contents

Advertisement

È
È
SVU2280
É
SWL2030T
É
SWL2040T
SPARK PLUG/

MAIN SWITCH

5. Tighten:
• Spark plug
Spark plug:
18 Nm (1.8 m · kg, 13 ft · lb)
NOTE:
To prevent thread damage, finger tighten a
the spark plug before tightening it to the speci-
fied torque b.
6. Install:
• Spark plug cap
7. Install:
• Panel 4
Refer to "COVERS, PANELS, AND
CAPS".
MAIN SWITCH
1. Check:
• Main switch
Checking steps:
• Set the main switch to "ON" "
the recoil starter to start the engine.
• Check that the engine stops when the
main switch is set to "STOP" "
Engine does not stop → Refer to "IGNI-
TION SYSTEM" in CHAPTER 4.
È 120 V-60 Hz, 220 V-50 Hz
É 230 V-50 Hz
• Check that the engine starts when the
main switch is set to "START" "
Engine does not start → Refer to "ELEC-
TRIC STARTING SYSTEM" in CHAPTER
4.
È 120 V-60 Hz, 220 V-50 Hz
É 230 V-50 Hz
2-19
INSP
ADJ
" and pull
" 1.
".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents