Table of Contents
Advertisement
5. Inspection
5-3.
Inspection and Factory Settings
Sequemnce
Item
1
External visual
check
2
Power switch
Auto mode
check
LCD-ON
EVF-ON
3
Zoom operation
check
4
Shock noise check
Auto mode
in Auto mode
LCD-ON
5-2
Preparations for adjustment
Mode
(measurement points, subject, other)
(1) Observe the camera.
(1) Connect the power supply
jig to the DC_IN terminal.
(2) Insert a xD-card and close
the card cover.
(3) Select the Mode dial
setting.
(4) Turn the camera on.
(5) If messages prompting the
user to set the language
and date are appears,
press the button specified
on the right.
(6) Check the display status.
(7) Press the <EVF/LCD>
button.
(8) Check for blemishes in the
CCD live image.
(1) Zoom drive noise.
(1) Apply a shock to the
camera using the shock jig.
Confidential: FUJIFILM Service Center Use Only
FinePix S5800/S800 Service Manual
Method of adjustment
(VRs, waveforms, required values)
(1) Check for damage to the
outer casing
(2) Check for problems with
the clicking or sliding
movement of switches.
(3) Check for dust or fogging
in the viewfinder and AF-
assist light window.
(4) Check for dust or fogging
in the LCD.
(1) Applied voltage:
5.0 ± 0.1 V
(2) Card for recording
checking
(3) Mode: AUTO
(4) Check that the camera
beeps.
(5) <DISP/BACK>
(6) Check that the live image
and text is displayed.
(7) Check that the live image
is displayed.
(8) Monitor a very bright
subject and check that the
live image does not dim or
darken.
(1) Check that there is no
abnormal noise.
(1) Check for problems on the
LCD monitor.
Check that the camera
recovers from synchronicity
disruption.
(Note) Do not apply shocks
directly to the lens or card
cover.
Measuring
Measurement points
equipment and jigs
(VRs, positions)
Advertisement
Table of Contents
