Inspection And Factory Settings - FujiFilm FinePix S5200 Series Service Manual

5. Inspection
5-3.

Inspection and Factory Settings

Sequemnce Item
1 External visual
check
2 Power switch Auto mode
check LCD-ON
EVF-ON
3 Zoom operation
check
4 Shock noise check Auto mode
in Auto mode LCD-ON
100
Mode Preparations for adjustment
(measurement points, subject, other)
(1) Observe the camera.
(1) Connect the power supply
jig to the DC_IN terminal.
(2) Insert a card and close the
card cover.
(3) Select the Mode dial
setting.
(4) Turn the camera on in
Photography mode.
(5) If a message prompting
the user to set the date
appears, press the button
specified on the right.
(6) Check the display status.
(7) Press the <EVF/LCD>
button.
(8) Turn the dioptric
adjustment dial up and
down.
(9) Check for blemishes in the
CCD live image.
(1) Zoom drive noise
(1) Apply a shock to the
camera using the shock
jig.
FinePix S5200/S5600 Service Manual
Method of adjustment
(VRs, waveforms, required values)
(1) Check for damage to the
outer casing
(2) Check for problems with
the clicking or sliding
movement of switches.
(3) Check for dust or fogging
in the viewfinder and AF-
assist flash window.
(4) Check for dust or fogging
in the LCD.
(1) Applied voltage:
5.0±0.05 V
(2) Card for recording
checking
(3) Mode: AUTO
(4) Check that the camera
beeps.
(5) <DISP/BACK>
(6) Check that the live image
and text is displayed.
(7) Check that the live image
is displayed.
(8) Check that the blurring of
the EVF screen varies.
Check that the dial turns
smoothly between the
upper and lower limits.
(9) Monitor a very bright
subject and check that the
live image does not dim or
darken.
(1) Check that there is no
abnormal noise.
(1) Check for problems on the
LCD monitor.
Check that the camera
recovers from
synchronicity disruption.
(Note) Do not apply shocks
directly to the lens or card
cover.
Measuring Measurement points
equipment and jigs (VRs, positions)