Table of Contents
Advertisement
Quick Links
4-Input 4K HDBaseT Presentation Switcher with
Matrix Outputs, USB 2.0, Multiview & Wireless Casting
SW-540-TX-W
WyreStorm recommends reading through this document in its entirety to become familiar with the product's features before beginning the
installation process.
IMPORTANT! Installation Requirements
• Read through the
guidelines before creating or choosing premade cables.
• While this product supports CEC, WyreStorm cannot guarantee
compatibility with all forms of CEC communication.
• Visit the product page to download the latest firmware, document version,
additional documentation, and configuration tools.
Basic Wiring Diagram
Copyright © 2021 WyreStorm Technologies |
SW-540-TX-W Quickstart Guide | 210607
section for important wiring
r
i t o
o n
o p
l M
p t
c a
L a
L o
o p
p t
L a
S W
i t h
t w
b l e
n g
s t i
T a
C a
wyrestorm.com
In the Box
1x SW-540-TX-W Transmitter
1x 12V 2A Power Supply (US/UK/EU/AU)
2x 4-pin Terminal Blocks
2x Mounting Brackets with Screws
1x Quickstart Guide (This Document)
e
v i c
D e
l a y
s p
D i
- 5
R X
KEY
W
X -
- T
4 0
- 5
1 of 4
Quickstart Guide
B
e r a
U S
m
C a
0 0
Control
USB-C
USB 2.0
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
support@wyrestorm.com
Advertisement
Table of Contents
Related Manuals for Wyrestorm SW-540-TX-W
Summary of Contents for Wyrestorm SW-540-TX-W
- Page 1 4-Input 4K HDBaseT Presentation Switcher with Matrix Outputs, USB 2.0, Multiview & Wireless Casting SW-540-TX-W Quickstart Guide WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features before beginning the installation process. In the Box IMPORTANT! Installation Requirements 1x SW-540-TX-W Transmitter •...
- Page 2 The SW-540-TX-W is configured using RS-232 or IP commands for Output Resolution, and EDID. Follow these steps to properly configure the transmitter based on the system requirement. Note: The steps and information provided in this QSG are for basic operation of the transmitter out of the box. Refer to the SW-540-TX-W API for full configuration settings.
- Page 3 • Configure EDID Settings to a lower resolution. • WyreStorm recommends using a cable tester or connecting the cable to • If transmitting 3D or 4K, verify that the HDMI cables used are 3D or 4K rated. other devices to verify functionality.
- Page 4 Safety and Emission CE | FCC | RoHS | RCM | EAC Note: WyreStorm reserves the right to change product specification, appearance or dimensions of this product at any time without prior notice. Warranty Information WyreStorm Technologies LLC warrants that its products to be free from defects in material and workmanship under normal use for a period of five (5) years from the date of purchase.
Need help?
Do you have a question about the SW-540-TX-W and is the answer not in the manual?
Questions and answers