4-Input 4K HDBaseT Presentation Switcher with
Matrix Outputs, USB 2.0, Multiview & Wireless Casting
SW-640L-TX-W
WyreStorm recommends reading through this document in its entirety to become familiar with the product's features prior to starting the
installation process.
IMPORTANT! Installation Requirements
• Read through the
Wiring and Connections
guidelines before creating or choosing premade cables.
• While these products support CEC for the HDMI outputs, WyreStorm
cannot guarantee compatibility with all forms of CEC communication.
• Visit the product pages to download the latest firmware, document version,
additional documentation, and configuration tools.
Basic Wiring Diagram
Copyright © 2024 WyreStorm ProAV Corporation |
Copyright © 2024 WyreStorm ProAV Corporation |
SW-640L-TX-W Quickstart Guide | 240422
SW-640L-TX-W Quickstart Guide | 240422
section for important wiring
wyrestorm.com
wyrestorm.com
In the Box
1x SW-640L-TX-W
1x 12V 9A Power Supply (US/UK/EU/AU)
2x Mounting Brackets
1x 2-pin Phoenix Connector (for PA Sensor)
1x 3-pin Phoenix Connector (for Relay)
1x 4-pin Phoenix Connector (for RS-232)
1x 5-pin Phoenix Connector (for Audio Out)
4x Wi-Fi Antennas
1x Quickstart Guide (This Document)
INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
1 of 4
Quickstart Guide
support@wyrestorm.com
Need help?
Do you have a question about the SW-640L-TX-W and is the answer not in the manual?
Questions and answers