Advertisement
CLEANING
Pagertec pagers are made from industrial-strength, polycarbonate material. However,
this material is susceptible to hairline cracking if non-approved cleaners are used. When
cleaning Pagertec pagers, you should only use ETHYL ALCOHOL (ethanol) or
ISOPROPYL ALCOHOL-BASED CLEANERS.
We have done extensive testing with available cleaning materials and have not found any
issues with either ethyl alcohol (ethanol) or isopropyl alcohol (IPA). ALL other cleaners are
not recommended for use on any of our pagers. To clean the equipment:
1. Take a clean cloth and an isopropyl-alcohol based cleaner
2. Wet the clean cloth with the isopropyl alcohol cleaner
3. Wipe down the pagers or equipment
4. When dry, place rechargeable pagers back on charge
SYSTEM PROGRAMMING
To enter programming mode, press the "SETUP" button on the transmitter and enter
the password "4545" followed by "enter". If the password is accepted, the display will show
"Menu Option Up Down". (Use the "↑"& "↓" key to scroll through the different menu
options or press "CANCEL" to exit the system programming menu.)
SET TIME
With this feature, you can set the current time into the Transmitter.
At the "Set Time" menu set the hour using Number key and then press, use "#" to set AM/
PM. Once you have set the correct time press "ENTER".
Advertisement
