System Programming - pagertec Smart Stack EVO User Manual

CLEANING
P agertec pagers are made from industrial-strength, polycarbonate material. However, ​
this material is susceptible to hairline cracking if non-approved cleaners are used. When
cleaning Pagertec pagers, you should only use ETHYL ALCOHOL (ethanol) or
ISOPROPYL ALCOHOL-BASED CLEANERS.
We have done extensive testing with available cleaning materials and have not found any
issues with either ethyl alcohol (ethanol) or isopropyl alcohol (IPA). ALL other cleaners
are not recommended for use on any of our pagers. To clean the equipment:
1.​ ​ T ake a clean cloth and an isopropyl-alcohol based cleaner
2.​ ​ W et the clean cloth with the isopropyl alcohol cleaner
3.​ ​ W ipe down the pagers or equipment
4.​ ​ W hen dry, place rechargeable pagers back on charge

SYSTEM PROGRAMMING

​
T o enter programming mode, press the "SETUP" button on the transmitter and enter the
password "4545" followed by "enter". If the password is accepted, the display will show
"Menu Option Up
options or press "CANCEL" to exit the system programming menu.)
SET TIME
W ith this feature, you can set up the current time into the Transmitter. ​
At the "Set Time" menu set the hour using Number key and then press, use ​ " #"
PM. Once you have set the correct time press ​ "
SET ALERT MODE
Down"​ . (Use the "↑"& "↓" key to scroll through the different menu
ENTER"​ .
t o set AM/ ​