pagertec TRACKSTAFF V3 User Manual page 5

OPERATION ( for Regular Paging)
1. Remove a pager from the charging base. Pagers will light up for 3 seconds.
2. Record the pager number
3. To call the pager:
a) Key in the Pager Number that you wish to active
b) Press "SEND"
5. Pagertec's Trackstaff V3 4 message Pagers will flash, vibrate and/or beep
depending on the alert mode.
OPERATION (for 4-Message Mode)
1. Remove a pager from the charging base. Pagers will light up for 3 seconds.
2. Record the pager number
3. To call the pager:
a) Select the color LED light that you wish to turn on by select
F1= Red F2= Yellow F3= Green F4= Blue followed by the
"Enter" key.
b) Key in the Pager Number that you wish to active
c) Press "SEND"
4. Pagertec's Trackstaff V3 4 message Pagers will flash, vibrate and/or beep
depending on the alert mode.