Advertisement
TURNING THE OUT OF RANGE ON
•
At the
"Out of Range"
•
Press the
"ENTER"
you that they received the new code.
•
Press
"CANCEL"
FIELD TEST (FACTORY DEFAULT: OFF)
With this feature you can determine what distance your transmitter will cover.
•
Remove a couple of pagers from the charging stack.
•
At the range test menu option, press "ENTER" key to turn range test "ON" and to start
the range test. As soon as the range test is activated you'll notice the pagers beep twice
every 5 seconds. Walk around your property. When you reach the point where the pagers
do not beep consistently, this is your maximum range. If you would like to increase your
power level, exit range test and call Pagertec.
•
Press the
"CANCEL"
exit the system programming menu.
NOTE: The transmitter has an auto shut off feature that will stop the range test after 15
minutes.
menu, press the
key. After sending the signal, all the pagers will light up once to tell
key to exit the system programming menu.
key to stop the range test. Press the
"#/Select"
key to turn the out of range ON.
"CANCEL"
key again to
Advertisement
