Advertisement
1. 2 SEC
2. 5 SEC
3. 10 SEC
4. 15 SEC
5. 30 SEC
6. 60 SEC
7. 90 SEC
8. 120 SEC
9. Continuance
• The pagers will now respond with your new selected alert time mode.
• Return all the pagers to the charger base or plug the power supply. The pagers are
ready to receive the page with its new alert mode.
• At this point, all of the pagers in your system should alert for the amount of time that
you selected.
4. Press the "Cancel" key to exit, and return to the main menu.
SET PAGER OFF
With this feature you can have the option of turning off the pager to save battery.
1. Remove all the pagers from the chargers
2. At the "set pager off" press "ENTER"
3. Pager off ? will appear on display
4. Press Send, all pagers that have received the signal will blink for 2 seconds
OUT OF RANGE (FACTORY DEFAULT: OFF)
With this feature, the pagers will beep when taken out of range of the transmitter to
inform the guest that they are too far away and will miss their page. The beeping will
automatically stop when they step back within range.
Be sure you have all your pagers before performing this procedure.
Advertisement
