Advertisement
CLIP REPLACEMENT
Polycarbonate Belt Clip:
To replace a damaged clip from a pager, first you must separate all parts. To do this first
remove the pin holding the clip on to the pager with a small screwdriver. Once removed,
replace the old leaf spring and attach the new belt clip to it. After everything is attached,
put the pin back in place and slide in until it locks. Replace clip with an appropriate
replacement part available for purchase as an accessory from Pagertec.
Metal Clip:
To do this first remove the screw holding the clip on to the pager with a small screwdriver.
Once removed, replace the damaged part and attach the new belt clip to it. After
everything is attached, put the screw back in place. Replace clip with an appropriate
replacement part available for purchase as an accessory from Pagertec.
Advertisement
