Daily Correction - Gema MagicControl 4.0 Operating Instructions And Spare Parts List

Daily correction

MagicControl 4.0 (CM40)
Rev. 01 12/21
The control offers the possibility to correct the powder output for all guns
per station in percent.
The output values can be corrected without modifying the programmed
values. The daily correction has the same effect on all guns and can be
changed in the range of 50%...150%. This means that 50%..150% of the
programmed powder quantity is conveyed without influencing the total air
volume.
Fig. 13:
The day correction is used:
–
In injector plants as compensation for wearing parts.
–
In plants with always equal parts as correction factor of the powder
mixture.
–
For different colors as a correction of the application, without
adjusting the basic program.
–
To compensate for differences in ambient conditions
(summer/winter).
Product description • 27