Intel P965 User Manual page 49

CPU Clock Ratio
Auto Detect PCI/DIMM Clk
Spread Spectrum
*** Current Host/PCI Clock is 133/33 MHz ***
Host/PCI Clock at Next Boot
*** Current DRAM Clock is 267MHz ***
DRAM Clock at Next Boot
CPU Vcore Select
VCC1.25V Select
VDIMM Select
CPU Vcore 7-Shift
Flash Part Write Protect
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Host Clock at Next Boot
This item allows you to select CPU frequency step by step increasing.
The choice are: 533MHz CPU---133MHz~350MHz, 800MHz CPU---200MHz~350MHz
DRAM Clock at Next Boot
This item allows you select the DRAM Clock for DDR2 533/DDR2 400. The setting are:
By SPD, DDR2 533, DDR2 400
CPU Vcore 7-Shift
This item allows you select the CPU Vcore Voltage xx% more than the standard value, by
this function for the precise over-clocking for extra demanding of performance.
CPU Vcore Select
This item allows you select CPU Vcore Voltage by increase 0.0125V step by step from
0.8375V to 1.6V or the Default setting is Default (CPU manufacturer Default setting).
VCC 1.5V Output
This item allows you to select 1.5V of the AGP VGA card. The choice are: Default,
1.5V,1.55V,1.6V,1.65V,1.70V,1.80V,1.90V,2.00V.
VDIMM Output
This item allows you to select DRAM Voltage. The choice are: 1.80V,1.85V,1.90V,
2.00V,2.05V,2.10V,2.15V.
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Settings
200/33 MHz
VCC 1.5V Output
1.25V(Default)．．．．．[
．．．．．[
1.55V
．．．．．[
1.60V
．．．．．[
1.65V
．．．．．[
1.70V
．．．．．[
1.80V
．．．．．[
1.90V
．．．．．[
2.00V
↑↓:Move ENTER:Accept ESC:Abort
F6:Optimized Defaults
8 X
Enabled
Disabled
By SPD(DDR533)
Default
1.25V(Default)
1.85V(Default)
Normal
Enabled
]
]
]
]
]
]
]
]
F7:Standard Defaults
45
Item Help
Menu Level >
F1:General Help