Chapter 2 Bootable Arrays; Copy Amd-Raid Drivers To A Removable Storage Medium: Windows - AMD NVMe/SATA RAID Quick Start Manual

[Public]
56268 Rev. 1.05 November 2021
Chapter 2
Note: Before beginning, have the Windows
ready to install.
Note: Windows: Removable storage (Flash Drive) required for Copying AMD -RAID drivers
2.1
A removable storage medium is needed to copy AMD RAID drivers required for OS
installation onto an AMD-RAID bootable array.
1. Power-on the system.
2. Locate and use a system that is running a Windows operating system and has a CD DVD
drive or an I/O port for removable storage media (such as a USB flash drive).
3. Insert the storage medium into the system:
Note: Windows 10: Connect a USB flash drive to a USB I/O port, or insert a blank CD-
DVD disk into the applicable drive.
4. Go to a browser and access the web site of your system supplier or motherboard vendor.
5. Download the AMD-RAID drivers from the web site to the appropriate removable
storage medium.
6. Proceed to Windows Install and load AMD-RAID drivers during a Windows OS
installation.
Chapter 2
Bootable Arrays
Copy AMD-RAID Drivers to a Removable Storage
Medium: Windows
AMD NVMe/SATA RAID Quick Start Guide for
®
operating system installation media available and
Bootable Arrays
Windows Operating Systems
9