AMD NVMe/SATA RAID Quick Start Manual page 19

[Public]
56268 Rev. 1.05 November 2021
6. At the Load Driver Warning message:
• Select OK.
7. At the Select the Driver to install window:
• Select Browse.
• Navigate to the directory containing the saved AMD-RAID drivers.
• Select OK.
• Select the AMD-RAID Controller (rcraid.inf) driver in the list.
• Select Next.
• Select (Check Mark) I Accept the License Terms.
• Select Next.
• Select Custom: Install Windows Only (advanced) or similar.
8. Once both drivers have been loaded, a valid Virtual Disk appears:
• Select Load Drivers.
• Select Browse.
• Navigate to the directory containing the saved AMD-RAID drivers.
• Select OK.
• Select the AMD-RAID Config Device (rccfg.inf) driver from the list.
• Select Next.
9. Select Next at the Where do you want to install Windows window.
10. Follow the on-screen instructions to complete the installation of the applicable Windows
operating system.
11. After the OS is installed, open Device Manager and verify the following:
• Expand Storage Controllers: there is an entry listed as AMD-RAID Bottom Device.
• Expand Storage Controllers: there is an entry listed as AMD-RAID Controller.
• Expand System Devices: there is an entry listed as AMD-RAID Config Device.
12. Remove the storage medium and Microsoft Windows OS CD -ROM or DVD from
the applicable drive(s) or port.
Proceed Installing the AMD RAIDXpert2 Management Suite for Windows
Chapter 6)
Chapter 5
AMD NVMe/SATA RAID Quick Start Guide for
Install AMD-RAID Drivers
Windows Operating Systems
®
. (Refer to
19