Advertisement
CM 100
INSTRUCTIONS FOR CEILING MOUNTING SUPPORT
CAUTION: THIS SUPPORT IS DESIGNED FOR USE ONLY WITH THE BARCO 801, 808,
1000, 1100, 1200, 1208, 1209, 1500, 1600, 5000, 5100, 8000 and 8100 SERIES
PROJECTORS. USE WITH OTHER APPLIANCES MAY RESULT IN INSTABILITY
CAUSING POSSIBLE INJURY.
INSTALLATION GUIDELINES:Refer to illustrations for detail.
PRECAUTION: installing the ceiling mount requires the presence of minimum two
persons, familiar with mechanical installations. A third assistent is recommended.
1. Mounting instructions for the upper support to the ceiling.
THE CEILING SHOULD BE CAPABLE OF SUPPORTING A WEIGHT OF AT LEAST
800Kg (1765 LBs).
IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY.
a. Fixation of the upper support to the ceiling.
Refer to the installation manual of the projector to know the throwing distance (PD) of the projector to the screen.
(distance Screen-front support projector).
Mounting-distance upper support from the screen (see fig. 5)
Attention: (refer to fig. 3-4) Keep in mind that the mentioned distance corresponds with a projector mounting with
the screwed rods in the fixation holes 2. This fixation allows to move the projector 5cm for- or backward without
changing the upport support mounting, see point 5c.
The mounting-distance PD' from the screen to the front of the UPPER SUPPORT is equal to the value, found
inthe mounting table of the installation manual of the projector (value PD), minus 11 cm.
PD' = PD - 11cm.
Installation guidelines
All manuals and user guides at all-guides.com
WARNING
IF IT CANNOT, THE CEILING MUST BE REINFORCED.
R9827341
R9827342
Date: 03/06/98
Page 5
Advertisement
