Advertisement
CM 100
C . Projector movement forward or backward
When adjusting the projector, it may happen that the projector must be located a few closer or further from
the screen in order to able to adjust the picture correctly.
The mounting kit allows a movement for- or backward of the projector of 5cm with regard to followed projector
ceiling mount procedure.
Proceed as follows:
- Remount the cord if it was removed.
- Refer to point 4: the assistent pulls slightly on the cord, to hold the projector in posi-
- Now, let down the projector slowly until it stands again on the roll tabel or on the
- Refer to point 3a: Move the cord support on the upper support until it locks in ref.
- Refer to point 4: Restart projector lifting up and mounting procedure.
- Repeat steps, explained in point 5.
Installation guidelines
All manuals and user guides at all-guides.com
tion, while the leader removes the nuts 2 and 3 on each screwed rod.
floor.
holes 1, projector movement forward, or in ref. holes 3 for a projector movement
backward.
R9827341
R9827342
Date: 03/06/98
Page 11
Advertisement
