Advertisement
CM 100
b. Projector axis adjustment
The projector axis has to be perpendicular to the screen in order to obtain for the projected picture of the outside
picture tubes sharp focussing left-right.
If the projector axis is not perpendicular to the screen surface, turn screw C clock- or anticlockwise until axis
is perpendicular to the screen.
When all adjustments are made, put the lifting cord on the projector and close the lowered ceiling around the
projector. If there is no lowered ceiling, the cord has to be removed.
Installation guidelines
All manuals and user guides at all-guides.com
R9827341
R9827342
&
Date: 03/06/98
Page 10
Advertisement
