OBH Nordica 7745 Instructions For Use Manual page 61

• Open the silicone valve on the vacuum lid to release the vacuum pressure
from the bottle (13). Fig 19.
• Remove the vacuum lid (fig 20) and attach the lid with the drinking spout
(11).
Overheating
The blender is equipped with a thermostat that is activated if the motor is
overloaded. If the thermostat is activated, turn off the appliance and unplug it.
Wait 30 minutes before restarting the appliance. Clean the parts as instructed
in "Cleaning and maintenance".
Charging the vacuum pump (8)
Insert the connector (9) into the vacuum pump's socket and then insert the
other connector into an adapter (DC5V, 1-2A). Adapter not included. Pic 1.
Plug the adapter into a wall socket (230V) to start charging. The vacuum
pump's LED indicator flashes red to indicate that charging is in progress. Pic 2.
61