Hanseatic MC-IF7021B2 User Manual page 51

Inductive glass ceramic hob
Table of Contents

Advertisement

Available languages

Available languages

Removing sugary or starchy food
residues, plastics or aluminium
foil
NOTICE
Risk of damage to property!
Sugary or starchy food residues, as well
as plastics or aluminium foil residue,
can cause permanent and irreparable
damage to the appliance.
■ If this happens, remove the dirt from
the still-hot glass ceramic with a
sharp, commercially available scrap-
er. While doing so, protect hands from
burns with oven gloves or pot holders.
1. If possible, remove residues while hot
from the hot cooking zone surface using
an appropriate scraper.
2. Once the appliance has cooled down,
you can remove stubborn dirt by using a
specially made, commercially available
detergent.
3. Treat the appliance with a special care
product after cleaning.
Cleaning the appliance
Something has boiled over on the
sensors
1. Switch off the appliance.
2. Wipe up the material that has boiled over
using a soft rag.
3. Wipe the sensor surface with a slightly
damp cloth.
4. Wipe the sensor surface completely dry
with a paper towel.
5. Switch the appliance back on.
If the sensors are dirty, for example be-
cause something has boiled over, the
appliance may turn itself off. You will hear a
signal tone. If the sensors are dirty or damp,
they may not work.
Page EN-21

Advertisement

Chapters

Table of Contents
loading

Table of Contents