Download
Share
Print this page
NCR Verifone VX805 Owner's Manual
  1. Manuals
  2. Brands
  3. NCR Manuals
  4. Racks & Stands
  5. Verifone VX805
  6. Owner's manual

NCR Verifone VX805 Owner's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
KIT INSTRUCTIONS
PIN Pad (Standard) - Verifone
Release 1.0
2368–K501
Issue A

Advertisement

loading
Need help?

Need help?

Do you have a question about the Verifone VX805 and is the answer not in the manual?

Questions and answers

Related Manuals for NCR Verifone VX805

Summary of Contents for NCR Verifone VX805

  • Page 1 KIT INSTRUCTIONS PIN Pad (Standard) - Verifone Release 1.0 2368–K501 Issue A...
  • Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
  • Page 3 Revision Record Issue Date Remarks Apr 2017 First Issue...

  • Page 4: Kit Content

    PIN Pad (Standard) – Verifone Introduction This kit provides the components to install a Verifone (VX805/VX820) PIN pad bracket to the NCR TouchPort 120 (2368) Kiosk. Kit Content...

  • Page 5: Installation Instructions

    1. Mount the Verifone PIN Pad and route the cable out of the Cradle. Secure with Screws (2). Note: Secure the Verifone VX805 PIN Pad using the top mounting holes and the Verifone VX820 PIN Pad using the bottom mounting holes.
  • Page 6 2368-K501 (PIN Pad Standard - Verifone) 2. Install the 3/8" P–Loop at the back of the bracket. Secure with screw (1). 3. Mount the Bracket on the PIN Pad Cradle assembly. Secure with screws (2).
  • Page 7 2368-K501 (PIN Pad Standard - Verifone) 4. Route the PIN pad cable through the P–Loop.
  • Page 8 2368-K501 (PIN Pad Standard - Verifone) 5. Turn the black plastic key counterclockwise to unlock the unit. 6. Pull the Countertop assembly.
  • Page 9 2368-K501 (PIN Pad Standard - Verifone) 7. Remove the screw beside the green plunger on each side of the unit and the screws (2) at the bottom of the Display Head assembly.
  • Page 10 2368-K501 (PIN Pad Standard - Verifone) 8. Pull the green plungers and twist it to a 90–degree angle on each linkage bracket, left and right, then lift the top of the unit forward until it stops. 9. Remove the MSR and NFC assembly installed on the left of the lower fascia. See Removing the MSR and NFC Assembly on page 9 .
  • Page 11 2368-K501 (PIN Pad Standard - Verifone) 11. Tighten thumbscrews (2) to secure the assembly. 12. Connect the Verifone PIN pad cable to the USB A port on the motherboard. Note: To prevent damage to the PIN pad cable, tuck it beside the Passport Reader. 13.
  • Page 12 2368-K501 (PIN Pad Standard - Verifone) Removing the MSR and NFC Assembly 1. Unplug the MSR USB Cable and Power Cable. 2. Remove the M4 nuts (4).
  • Page 13 2368-K501 (PIN Pad Standard - Verifone) 3. Remove the screw at the bottom of the MSR and NFC assembly. 4. Partially remove the MSR and NFC Assembly just enough to provide access to the cables.
  • Page 14 2368-K501 (PIN Pad Standard - Verifone) 5. Unplug the NFC Modular Jack from the controller receptacle and the NFC Antenna Wire from the NFC module.

This manual is also suitable for:

Verifone vx820