6/36
About this documentation
Bosch Rexroth AG, Valve amplifier VT-MSPA, RE 30232-B/08.2020
• Type and source of danger!: specifies the type and source of hazard
• Consequences: describes the consequences in case of non-observance
• Precaution: specifies how the hazardous situation can be prevented
Table 2: Hazard Classifications according to ANSI Z535.6-2011
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
1.3.2 Symbols
The following symbols indicate notices which are not safety-relevant but increase the
comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol
Meaning
If this information is disregarded, the product cannot be used or operated
in an optimum manner.
▶
Individual, independent action
1.
Numbered instruction:
The numbers indicate that the actions must be carried out one after the
2.
other.
3.
1.3.3 Terms
The following designations are used in this documentation:
Table 4: Terms
Term
Meaning
Electronics
Command value cards, amplifiers, and controls manufactured by Bosch
Rexroth
1.3.4 Abbreviations used
The following abbreviations are used in this documentation:
Table 5: Abbreviations used
Abbreviation
Meaning
ANSI
American National Standards Institute
EMC
Electromagnetic compatibility
FC
Frequency converter
PELV
Protective Extra Low Voltage
Meaning
Indicates a hazardous situation which, if not avoided, will
certainly result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Damage to property: The product or the environment could
be damaged.