Remove - New Holland Speedrower 200 Service Manual

Engine - Remove
1. Remove bolt (2) on starter to disconnect ground cable
and the negative battery cable.
2. Remove battery post nut and disconnect positive bat-
tery cable (3).
3. Remove protective cap and disconnect all cables from
starter solenoid (1).
4. Disconnect cable and two wires (1) from alternator (2).
Remove complete wire harness from engine block.
5. Drain coolant from radiator and engine by opening
valve (1). Catch fluid from drain hose and save for
recycling. Remove the radiator cap to speed up the
draining, using caution if the system is hot.
6. Disconnect drain hose (2).
7. Loosen pipe clamp (1) and remove exhaust stack (2).
Remove pipe clamp (3) clamp (4) and remove pre-
cleaner assembly (5).
Engine - Engine and crankcase
47698329 14/04/2014
10.1 [10.001] / 6
1
NHIL13WR00112AA
2
NHIL13WR00108AA
3
76075193
4
76075196