Navigation & Conning Display - KELVIN HUGHES HBK-4002 Quick Start Manual

5.4 Navigation & Conning display
When navigation & conning display mode is started from the standby screen, the transceiver
selected as Master will transmit and the antenna will rotate.
Transceiver activation when changing display modes
A navigation mode controlling
(mastering) a transceiver.
i.e. it is transmitting and the
antenna is rotating.
Stop the transceiver/ antenna
Setting the system to Standby stops a mastered transceiver but does not switch it OFF.
Kelvin Hughes
MANTADIGITAL
Go to Run ...
5
Chapter :
On interswitched
systems, firstly
select the desired
transceiver.
From the standby
screen select
Navigation &
Conning Display
Change navigation mode to
Navigation & conning mode
using Selected Display Mode.
i.e. change mode without
returning to Standby screen.
HBK-4002, issue 2 February 2013
Page 21 of 26
TM
Quick Start Guide:
Navigation & conning mode
selected; the transceiver
continues to transmit and
antenna rotates.