Trackerball And Buttons Explained - KELVIN HUGHES HBK-4002 Quick Start Manual

4.5 Trackerball and buttons explained

M
T
The system is operated using a trackerball and three buttons in a similar way
MANTADIGITAL
to operating a mouse on a desktop computer.
The trackerball is used to change the position of the on-screen cursor, the three buttons on
the trackerball correspond to the 'on-screen' functions with each button action shown in the
lower right hand side of the display.
If a button is blank (no text) then the button has no function.
In the Operator's handbook, the button layout for each function is described as follows:
If a button has no function or action then the cursor button is blank as shown below:
Kelvin Hughes
MANTADIGITAL
4 Getting started
Chapter :
2
1
Left Middle
AIS ON/ OFF AIS settings
Switches AIS
Opens the AIS
targets ON or
settings dialog
OFF
Left Middle
Select Target Acquire
HBK-4002, issue 2 February 2013
Page 11 of 26
TM
Quick Start Guide:
On-screen cursor buttons
1
2
1
2
3
Right
Safety-Rel Msgs
Opens AIS Safety
Related
Messages (AIS
SRM)
Right
3
3