Table of Contents
Advertisement
4.4 Display control panel
The display control buttons located at the bottom of the display are common to all console,
desktop and pedestal mounted displays.
System Alarm
button
This button
brilliance of the
flashes and an
trackerball and
audible alarm is
display control
generated when
there is a
potential error
within the system
Pressing the
illumination from
system alarm
button silences
maximum in 13
the alarm
steps. At the 14
The button
remains
returns back to
illuminated red
until the alarm
condition is
cleared
(See note)
Note: The System Alarm button does not indicate or silence navigation alarms such as collision
warning etc.
Kelvin Hughes
MANTADIGITAL
4
Chapter
:
The function of each button is detailed below.
Display
Screen
brilliance
Button
illumination
Changes the
Increases or
decreases the
main widescreen
TFT display
buttons
backlight
illumination
Repeated
Press and hold
presses
the 'up' and
increases the
'down' buttons
OFF to
together for
approximately 3
th
seconds to revert
press the
the backlight to
illumination
the default
brilliance level
OFF
HBK-4002, issue 2 February 2013
Page 10 of 26
TM
Quick Start Guide:
Getting started
Switch
screens
For systems
fitted with the
optional
MANTADIGITAL
network
controller (DNC),
press to select
the video from a
different
processor
If no DNC is
fitted, this button
has no function
Power ON/
OFF
Press to switch
the display and
processor ON/
OFF
CAUTION:
This is a
software ON/
OFF control and
does not isolate
the system from
the AC mains
supply
Advertisement
Table of Contents
