Server Startup And Shutdown; Shutting Down The Server - Hologic Cenova R2 2.0 User Manual

Part 3: System Operation

3.4. Server Startup and Shutdown

The R2 Cenova server does not require regular maintenance. The only procedures
you might need to perform are:
• Starting up the server

• Shutting down the server

• Restarting the server (turning off and on again)
For these procedures, you need to know the IP address for the computer. Ask your IT
administrator for the R2 Cenova server IP address. Write that number here:
R2 Cenova Server IP Address:
Shutting Down the Server
You might need to shut down the R2 Cenova server if you are going to move the
computer, or if you know the power is going out for a period of time.
m
order to switch the server back on, you will need to have physical access to the server.
 To shut down the server:
Using a computer that is on the same network as the server, open a web browser (e.g.,
1
Internet Explorer).
Type the IP address for the server in the address box and press [Enter]. You do not
2
need to type 'http' or anything other than the IP address.
At the log-in screen, enter the user name ('siteadmin') and password. The 'About'
3
screen should appear as shown below.
10 R2 Cenova 2.0 User Manual – MAN-01975 Rev 002
Important! If you shut down the server from a remote location, be aware that In
_________________________