Recommended Settings - STIEBEL ELTRON DHE Connect 18 Operation And Installation Manual

OPERATION
Settings
4.2

Recommended settings

Your instantaneous water heater offers maximum precision and
maximum convenience in DHW provision. Should you nonetheless
be operating the appliance with a thermostatic valve, we recom-
mend that you:
f Adjust the set temperature on the appliance to over 50 °C. f
Then set the required set temperature on the thermostatic
valve.
Saving energy
The following recommended settings will result in the lowest en-
ergy consumption:
- 38 °C for hand washbasins, showers, bath
- 55 °C for kitchen sinks
Recommended setting for operation with a thermostatic valve
and water preheated by solar energy
f Set the temperature at the appliance to the maximum f
temperature.
www.stiebel-eltron.com
Following an interruption to the water supply
Material losses
!
To ensure that the bare wire heating system is not dam-
aged following an interruption to the water supply, the
appliance must be restarted by taking the following steps.
f Isolate the appliance from the power supply; do this f
by removing the fuses or switching the appliance to
"OFF".
f Open the tap for one minute until the appliance and f
its upstream cold water inlet line are free of air.
f Switch the power supply back on, or set a tempera- f
ture on the appliance or wireless remote control.
DHE Connect | DHE Touch | 75