Wall Mounting Bracket When Replacing An Appliance; Installation With Offset Tiles - STIEBEL ELTRON DHE Connect 18 Operation And Installation Manual

INSTALLATION
Alternative installation methods
f Fit the lower back panel section by bending it out at the sides f
and guiding it over the pipes.
f Insert the connection pieces into the lower back panel sec- f
tion from behind.
f Click the lower back panel section into place. f
f Secure the lower back panel section with a screw. f
14.9 Wall mounting bracket when replacing an
appliance
An existing STIEBEL ELTRON wall mounting bracket may be used
when replacing appliances (except the DHF instantaneous water
heater), as long as the fixing screw is in the lower right position.
Replacing a DHF instantaneous water heater
f Reposition the fixing screw on the wall mounting bracket (the f
fixing screw has a self-tapping thread).
f Rotate the wall mounting bracket 180° and mount it on the f
wall (the DHF logo is then turned towards you).
www.stiebel-eltron.com

14.10 Installation with offset tiles

20
2
1
1 Minimum contact area of the appliance
2 Maximum tile offset
f Adjust the wall clearance. Lock the back panel in place using f
the fixing toggle (turn 90° clockwise).
DHE Connect | DHE Touch | 107