Advertisement
PRODUCT INTRODUCTION
Anti-drop sensor
Maintenance
Clean the sensors with a dry, soft cloth, include:
1. The sensors along the side of the robot.
2. Three anti-dropping sensors at the bottom of the robot.
3. Infrared avoidance sensor in the front of the robot.
4. Radar avoidance sensor on the top of the robot.
5. Electric shock protector and charging base shrapnel at the
Battery cover
bottom of the robot (please cut the power off during cleaning).
6. Signal transmission area of charging base.
Driving wheel
Clean it regularly
Rolling brush
Anti-drop sensor
Anti-drop sensor
Charging contact
points
Side brush
Universal wheel
Rolling brush
cover
Advertisement
