Page 1
If you have already completed the following procedure, reset the robot vacuum by setting the red switch on the side of the robot to ‘off’ for at least ten minutes. APP INSTRUCTION XPOWER+ Make sure the robot is Remove the robot from Place the robot close to your fully charged.
Page 2
Download the app for your Make sure your phone Open the app and register speci ic robot. is connected to the yourself; select ‘Europe’ Wi-Fi network. as your area. (Bluebot Robotics app for the XPOWER+) Please note that the robot works on a frequency of both 2.4 &...
Page 3
(XPOWER+) Wait until the robot has Continue to the next step in started fully. Press and hold the button on the app. the top until it begins to blink. Use the blue button to ‘Reset’. Select your Wi-Fi signal. The robot works on both 2.4 &...
Page 4
Enter your password for Press the ‘home’ button on The app will now connect to Wi-Fi connection. your phone and go to the the robot. Wi-Fi settings. Select the network that blaupunkt_ begins with return to the app. Hold the telephone in close proximity to the robot.
Need help?
Do you have a question about the BLUEBOT XPOWER+ and is the answer not in the manual?
Questions and answers